About this blog...

The people of Esri UK sharing what we do, what inspires us and how we get the most out of Esri technology.

Entries on this blog are the views of the individual authors and do not necessarily represent the views of Esri UK.

Follow us

Search
LVF Blog Page
Schools Blog Page
Technical Support Blog Journal
Think Location
« Understanding which Transformation to choose in ArcGIS | Main | Hide and Seek with the Desktop Licence Manager Server Status Enquiry »
Monday
Mar262012

Coordinate systems and projections for beginners

This blog post gives a basic introduction to coordinate systems and projections, with a focus on UK data. To seasoned geographers, I apologise for all the things I've simplified or simply left out! My intention is to provide GIS novices who are a bit confused by the topic with just enough about various different coordinate systems to get started working with them in ArcGIS. Anyone looking for an excellent comprehensive introduction should refer to Ordnance Survey's guide.

A coordinate system lets us define where a location is in space. In GIS, there are many types of coordinate systems, of which the two most used are geographic (3D) and projected (2D). The difference is shown below:

A geographic coordinate system (GCS) uses a grid on the surface of a 3D globe (the technical term for this grid is graticule; the North/South lines are lines of longitude and the East/West lines are lines of latitude). Graticule lines are not parallel to each other because they are defined using angles (e.g. degrees) from the centre of the globe, not linear units (e.g. metres) on a flat surface.

A projected coordinate system (PCS) is a flattened version of a 3D coordinate system. Grid lines are parallel, and coordinates are given in "flat" units like metres or feet. Although the Earth isn't flat, we often use flat surfaces to represent it (paper surfaces, computer screens, etc), so we frequently need to convert 3D coordinates to 2D coordinates. However, there's a problem: imagine peeling the skin off an orange and trying to make it sit flat on a table. It's not possible to do this without ripping or stretching the peel! It's the same with a 3D coordinate system. Whenever we flatten, or "project", a 3D coordinate grid to a 2D coordinate grid, we have to distort the grid's proportions somehow. Distances, shapes, areas, and angles, or some combination of all four, are deformed.

If you work with UK data, there are two geographic and two projected coordinate systems that you should know about. They are shown in the diagram below, along with the numeric WKID (Well-Known ID) of that GCS/PCS, as well as their relationships with one another and example coordinates in each system showing the location of Esri UK's head office in Aylesbury.

World Geodetic System (WGS-84) is familiar to many non-geographers because it is used by GPS devices to describe locations all over the Earth. A different GCS, called OSGB-36, which is more accurate for describing locations in Britain but not as good for other countries, is used specifically for British data. Web Mercator is a PCS based on WGS-84 used for global maps, and British National Grid is a PCS based on OSGB-36 used for British maps.

For each GCS, there are many different ways of converting, or "projecting", 3D coordinates to 2D coordinates. Web Mercator and British National Grid are the most important projections for their respective geographic coordinate systems. There are alternative projections, each with its own pros and cons (this link has more information, as well as an entertaining video clip).

Converting between coordinate systems that are based on the same GCS is relatively straightforward, but when converting, for example, GPS (WGS-84) coordinates to BNG eastings and northings, a mathematical transformation is required. The "Petroleum" transformation is an accurate transformation from WGS-84 to OSGB-36 (and vice-versa) included with ArcGIS.

To convert data between WGS-84 and BNG in ArcGIS Desktop, you should use the Project tool. Make sure you select the "Petroleum" transformation otherwise your results will not be accurate.

Select the optional Petroleum transformation for the best results

For GB data, you only really need to know about WGS-84 and BNG, and that you should use the Petroleum transformation to get an accurate conversion between them. You will also need to use "Petroleum" to convert between BNG/OSGB-36 and Web Mercator (or WGS 1984 Web Mercator Auxiliary Sphere, to give it the name used by Esri). Web Mercator has become the standard projection for international consumer web maps, such as Google Maps, Bing Maps, and OpenStreetMap. All ArcGIS Online basemaps are also in this projection.

PrintView Printer Friendly Version

EmailEmail Article to Friend

Reader Comments (3)

Please can you provide some more information on why the Petroleum transformation should be used. Are there any cases where another transformation in the list should be used?
April 4, 2012 | Unregistered CommenterCraig
Hi Craig. Thank you very much for your excellent question.

In short, each option has a different accuracy depending on the output accuracy you require on your data but also the geographic area around the UK in which it resides. So, for example the first one in the list will give you an accuracy of +-21m. The petroleum transformation give you the best accuracy at +-2m across the majority of the UK.

Based on your comment we're going to work up a follow on blog article which explains this in more detail so please keep an eye out for that!
Can you give me some information about Co-ordinate Systems in Maths? And also some examples that would really help a lot!
January 22, 2014 | Unregistered CommenterSarah Jessica

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Post:
 
All HTML will be escaped. Hyperlinks will be created for URLs automatically.